3/20/2021 0 Comments Hp Procurve 6120Xg
CCNY Tech can provide you with a quick quote for ALL your IT hardware needs.We offer one million IT products, parts and accessories not advertised on our website.Now you can get the ProCurve value proposition of advanced technology, performance, ease of use and reliability in an energy efficient blade switch.
![]() ![]() You can save these settings if you wish for a later session. Hp Procurve 6120Xg Password Are BlankThe default username and password are blank, so just press enter at each. Here I chose Unicast mode and set my SmoothWall box as the time server. On my network, I have removed public in favour of a custom string (name), set it to manager (so Spiceworks can get more info), but set write access to restricted for security purposes. In the console Window, go back to the main menu, then choose 0. Logout. Confirm by pressing y then enter, then the console window closes. If you use a proxy server, add the IP address as a proxy bypass (you can use wildcards if you have to edit a lot of switches via the GUI.). At the minimum, I set up a separate VLAN for management IP addresses for the switches, we have also used VLANs for a few different roles across switches. As a rule, I dont tag VLANs on switches where they are not needed, as there is no need for the additional traffic on those switches. So for example, say we were using HPs wireless modules on the core switch, ports with workstations would be untagged on VLAN1, and ports with WAPs would be untagged on a different VLAN. This is useful as you can set a scan range in Spiceworks that only uses that subnet (make sure Spiceworks can see that subnet.) I also have a folder with shortcuts to all my switch GUIs on the desktop of the Spiceworks server, for quick access. The page will then reload, and youll be prompted twice for your username and password (once to grant read access, then once more for read-write.) Enter your read-write password twice. You can also view the software (firmware) version, and if you wish upload a newer version (bearing in mind 15 or above will change the look of the GUI). Ive noticed that it appears at the top of the How-tos on the HP Group. Could one of you explain why Its not an extremely urgent matter, just something thats been on my mind. So my recommendation would be to have the most common traffic type (e.g: workstations on VLAN1) on the switch untagged. The management VLAN we use just for accessing the switch to configure it, so it doesnt need to be accessed that often. So, by setting a given port and vlan combination as untagged, youre telling the switch to tag packets at that port with a specified VLAN ID when they arrive untagged. I often refer to this document when configuring my HP switches. We have four switches (HP 2910al), one of which is our core (routing) switch. I have a static trunk (not lacp) to each of our access switches. In this scenario, do I even need to have spanning-tree enabled.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |